Gas burner clicks but won't light
We test the igniter and gas valve, clean or replace the igniter, and verify every burner lights cleanly. A leak detector check confirms no gas is escaping before we leave your kitchen.
When your stove quits, you need stove repair Cupertino CA homeowners can count on. Same Day Appliance Repair Cupertino handles gas and electric ranges, cooktops, and wall ovens across Santa Clara County. We diagnose the real fault, carry the parts, and get your kitchen cooking again, often the same day you call.

Stove repair Cupertino CA is the diagnostic and repair work that restores a gas or electric range, cooktop, or wall oven to safe, full function. It covers a failed igniter that clicks but never lights, a heating element that stays cold, a control board that throws error codes, and a thermostat that runs 50 degrees off. Our techs test the circuit with a multimeter and clamp meter, inspect the igniter and gas valve on gas units, and check the heating element and control board on electric ones before we replace anything.
Most Cupertino calls come from kitchens in older Rancho Rinconada and Monta Vista homes where a 15- to 20-year-old range finally gives out, plus newer Downtown Cupertino condos with built-in cooktops that trip a breaker. If your gas stove is not lighting, or your electric stove won't hold temperature, that's a job for a stove technician Cupertino CA residents can reach at (669) 308-4259. We stock igniters, thermostats, and elements for Sub-Zero, Wolf, Viking, Thermador, Bosch, Samsung, LG, Whirlpool, GE, Maytag, KitchenAid, and Frigidaire so most repairs finish in one visit.
Every stove repair visit covers a full diagnostic, the repair itself, and a safety test before we leave. Here's what's standard, and what we can add if your kitchen needs more.
We test the circuit with a multimeter and clamp meter, check the igniter and gas valve on gas units, and inspect the heating element and control board on electric ones. Diagnosis takes 20 to 30 minutes and pinpoints the real fault.
We replace the failed igniter, heating element, thermostat, or control board with a factory-spec part. Common parts for major brands ride on the van, so most repairs finish in one visit instead of waiting on a shipment.
Every gas stove repair ends with a leak detector check on all connections. This is a safety step, not an optional add-on, and it's how we confirm the unit is safe to use before we hand it back to you.
We light every burner, bring the oven to temperature, and run a full cycle before we leave. If something isn't right, we catch it on site, not after you've started cooking dinner.
Parts and labor are covered for 90 days. If the same fault returns, we come back and fix it at no cost. That warranty applies to every stove repair we do across Cupertino and Santa Clara County.
Call (669) 308-4259 or book online and tell us the brand, fuel type, and what the stove is doing. We give you a two-hour arrival window, not an all-day wait, and confirm the address and ZIP so the right tech and parts get routed to you.
The tech tests the unit on site: multimeter and clamp meter on the circuit, igniter and gas valve check on gas stoves, heating element and control board check on electric. Diagnosis usually takes 20 to 30 minutes, and we explain what failed in plain terms before quoting the fix.
You get a flat price for the repair before any work starts. If it's a $200 igniter swap or a $400 control board replacement, you'll know which and why. No work begins until you say go, and there's no charge for the estimate.
We replace the failed part, then run the stove through a full cycle: all burners lit, oven brought to temperature, and a leak check on gas units. Most repairs wrap in 60 to 90 minutes, and we clean up the work area before we leave your kitchen.
Every repair carries a 90-day parts-and-labor warranty. If the same fault returns inside that window, we come back and make it right at no cost. You also get a note on what to watch for so a small issue doesn't turn into a full replacement.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Tests voltage and continuity on heating elements, thermostats, and control boards to pinpoint the exact failed component before we replace anything.
Measures current draw on electric stoves to confirm an element or board is pulling the right load, which catches faults a simple voltage test misses.
Sniffs gas connections on every gas stove repair. This is how we confirm no leak remains before we hand the unit back to you.
Checks gas pressure on range supply lines and on refrigerant-adjacent appliances, so we know the unit is getting the pressure it needs to run safely.
Spots hot spots on control boards and wiring that don't show up visually, which helps us catch a failing component before it shorts out.
Opens range and cooktop panels cleanly without stripping fasteners, so your appliance goes back together the way it came apart.
Makes clean, code-correct connections when we replace igniters, elements, and control boards, so the repair holds up long term.
A homeowner in Monta Vista had two burners that clicked but never lit. They'd been using a long lighter for weeks, which is a real safety risk with gas building up before ignition.
We replaced both igniters, cleaned the burner ports, and ran a leak check on all connections. Every burner now lights on the first click, and the full repair took about 75 minutes.
An oven in Rancho Rinconada ran about 50 degrees below the set temperature. Baking failed repeatedly and the homeowner had replaced two batches of cookies before calling us.
We tested the thermostat and temperature sensor, replaced the failed thermostat, and verified the oven hit 350 within a normal range. The repair finished in under 90 minutes.
A Downtown Cupertino condo owner had a built-in cooktop that tripped the breaker whenever two burners ran at once. They'd been cooking one burner at a time for months.
We traced the fault to a failing control board, replaced it with a factory-spec part, and tested the full circuit. The breaker now holds with all burners running, fixed in a single visit.
Most stove failures fall into a handful of patterns. Here are the ones we see most in Cupertino kitchens, and how we handle each.
Ask a pro →We test the igniter and gas valve, clean or replace the igniter, and verify every burner lights cleanly. A leak detector check confirms no gas is escaping before we leave your kitchen.
We test the element and its circuit with a multimeter, replace the failed element or the control board feeding it, and run the burner through a full heat cycle to confirm it holds.
We check the thermostat and temperature sensor, replace the failed part, and verify the oven hits set temperature within a normal range. Most thermostat swaps take under 90 minutes.
We read the fault code, test the board and its connections, and replace the control board if it's failed. We stock boards for major brands so most of these repairs finish the same day.
$180 - $450 depending on scope
Typical 2026 pricing for stove repair in Cupertino runs $180 to $450, including the diagnostic visit. Simple igniter or element swaps sit at the low end; control board or gas valve replacements push toward the top. We quote the full price before any work starts, and the estimate is free. What you pay depends on the part, the brand, and how accessible the unit is, not on how long we're in your kitchen.
You're paying for a licensed tech, factory-spec parts, a leak check on gas units, and a 90-day warranty. A cheap patch that fails in a month costs more in the end. We quote the full price up front so you can decide with real numbers.
A standard igniter or heating element is inexpensive. A control board or gas valve for a high-end brand like Wolf, Viking, or Thermador costs more, and that difference shows up in the quote.
Gas repairs include a leak check and licensed handling, which adds a step. Electric repairs are usually faster but can involve a control board that costs more than a simple element.
Freestanding ranges are quick to open. Built-in cooktops and wall ovens in Downtown Cupertino condos take longer to access, and that labor shows up in the price.
One failed igniter is a straightforward job. If the igniter and the control board both failed, the repair costs more, and we'll tell you that up front rather than after the fact.
“Our gas stove stopped lighting on two burners and we'd been putting it off for weeks. The tech showed up the same afternoon, tested the igniters, and replaced both in under an hour. He did a leak check before leaving and the price matched the quote exactly. Cooking again that night.”
Priya M.Homeowner, Monta Vista
✓ Verified“Electric oven wouldn't hold temperature and the stove top was fine, which made it confusing. They diagnosed a bad thermostat in about 20 minutes and had the part on the van. Total visit was under two hours and the oven now hits 350 exactly. Fair price, no upsell.”
Daniel R.Homeowner, Rancho Rinconada
✓ Verified“My built-in cooktop tripped the breaker every time I used it. They traced it to a failing control board, ordered nothing because they had it on the truck, and fixed it in one visit. Also checked my range hood while they were there. Honest, fast, and clean work.”
Karen L.Condo Owner, Downtown Cupertino
✓ VerifiedMost stove repairs in Cupertino run $180 to $450 in 2026, including the diagnostic visit. A simple igniter or heating element swap sits at the low end; a control board or gas valve replacement pushes toward the top. We quote the full price before any work starts, and there's no charge for the estimate.
The most common cause is a dirty or failed igniter, followed by a clogged burner port or a weak gas valve. If you hear clicking but no flame, the igniter is usually the culprit. We test the igniter and gas flow on site, replace the failed part, and run a leak check before we leave.
Yes. We repair electric ranges, cooktops, and wall ovens across Cupertino, including coil, glass-top, and induction models. Common electric failures are a burned-out heating element, a faulty thermostat, or a control board that won't hold temperature. Most electric stove repairs finish in one visit.
Once we're on site, most repairs take 60 to 90 minutes. Diagnosis adds 20 to 30 minutes at the start. If we have the part on the van, which is the case for most major brands, the whole visit wraps in about two hours. Same-day stove repair Cupertino bookings are usually done before dinner.
A dead stove doesn't wait, and neither should you. Call Same Day Appliance Repair Cupertino at (669) 308-4259 for same-day service, upfront pricing, and a 90-day warranty on every repair. We're licensed, insured, and local to Santa Clara County.
Book Same-Day Repair (669) 308-4259 →Call us at (669) 308-4259 or email info@samedayappliancerepaircupertino.com to book your appliance repair. We answer calls seven days a week and offer same-day appointments across Cupertino. Most calls are scheduled within two hours.